How to strip laminate furniture in 5 easy steps

When it comes to giving your laminate furniture a new lease on life, stripping and refinishing is the way to go! With a little elbow grease and the right products, you can transform laminate furniture from drab to fab in no time. Here’s how to strip and refinish laminate furniture like a pro:

1. Start by removing all hardware from the piece of furniture. This includes any knobs, handles, or drawer pulls. Set these aside in a safe place so you don’t lose them during the stripping process.

2. Next, use a putty knife to scrape off any old paint or finish that’s still clinging to the furniture. If the furniture has any raised details or designs, be careful not to damage them as you scrape.

3. Once the old finish has been removed, it’s time to start stripping the laminate. You’ll need a good quality laminate stripper for this step. Apply the stripper to the furniture according to the manufacturer’s instructions, and let it sit for the recommended amount of time.

4. After the stripper has had a chance to work its magic, use a putty knife or other scraper to remove the stripper and any remaining finish from the furniture.

5. Once the furniture is completely stripped, it’s time to sand it. This will help create a smooth surface for the new finish to adhere to. Use a medium-grit sandpaper and sand the furniture in the direction of the grain.

6. Now that the furniture is prepped and ready, it’s time to apply the new finish. If you’re planning on painting the furniture, now is the time to do it. If you’re staining the furniture, apply a liberal amount of stain to the surface and wipe away any excess with a clean cloth.

7. Once the new finish is applied, let it dry completely before replacing any hardware or putting the furniture back into use.

How to strip laminate furniture in 5 easy steps

If you have laminate furniture that is in need of a makeover, stripping it and starting fresh is a great option. Laminate is a durable material, but it can become dated or damaged over time. Stripping laminate furniture is not a difficult task, but it does require some patience and elbow grease. With a little bit of time and effort, you can transform your laminate furniture into something new and fresh.

Here are the basic steps for stripping laminate furniture:

1. Remove all hardware from the piece of furniture. This includes any knobs, handles, or pulls. Set the hardware aside in a safe place so that you can reattach it later.

2. Use a putty knife to scrape off any old paint or varnish that may be on the surface of the laminate. If the surface is particularly rough, you may need to use a sanding block to smooth it out.

3. Once the surface is prepared, apply a generous amount of stripper to the furniture. Make sure to cover the entire surface evenly.

4. Let the stripper sit on the furniture for the amount of time specified by the manufacturer. This will usually be around 15-20 minutes.

5. Use a putty knife or scraper to remove the stripper and any old paint or varnish from the furniture. You may need to use a little elbow grease to get all of the stripper off.

6. Once the stripper is removed, use a clean cloth to wipe down the furniture and remove any residue.

7. If you want to, you can now sand the furniture to create a smooth surface.

8. Now you are ready to paint, stain, or refinish the furniture any way you like!

Stripping laminate furniture is a great way to give it a new lease on life. With a little bit of time and effort, you can transform your old furniture into something new and fresh.

Conclusion

To strip laminate furniture, start by sanding down the surface with coarse-grit sandpaper to rough it up. Next, apply a generous amount of stripper to the furniture with a paintbrush, making sure to get into all the nooks and crannies. Let the stripper sit for 15-20 minutes, then use a putty knife or scraper to remove the old finish. Once all the finish is removed, sand the furniture down with fine-grit sandpaper to smooth it out. Finally, apply a new finish of your choice.

 

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top