How to Refinish Furniture with Veneer

If your furniture is starting to show its age, you may be wondering if it’s time to refinish it. After all, a fresh coat of paint or stain can do wonders for updating the look of your furniture. But what if your furniture is covered in veneer?

Veneer is a thin layer of wood that’s glued to a piece of furniture to give it a smooth, finished look. It’s a popular material for furniture because it’s less expensive than solid wood and it’s easy to care for.

So, can you refinish furniture with veneer? The short answer is yes, but it’s not a project for beginners. You’ll need to be careful not to damage the veneer while you’re working.

Here’s a step-by-step guide to refinishing furniture with veneer:

1. Start by sanding the veneer with a fine-grit sandpaper. This will help to rough up the surface so that the new paint or stain will adhere better.

2. Wipe down the furniture with a damp cloth to remove any dust from sanding.

3. Apply a primer specifically designed for use on veneer. This will help the new paint or stain to stick to the surface.

4. Once the primer is dry, apply your new paint or stain. Be sure to follow the manufacturer’s instructions for best results.

5. Allow the paint or stain to dry completely before using the furniture.

Refinishing furniture with veneer can be a bit of a challenge, but it’s definitely doable. Just take your time and be careful not to damage the veneer. With a little patience, you’ll end up with beautiful, like-new furniture.

How to Refinish Furniture with Veneer

When refinishing furniture, it is important to use a material that will not only protect the piece, but also give it a beautiful finish. Veneer is one of the best materials to use for this purpose. It is a thin sheet of wood that is glued to the surface of the furniture.

Veneer is available in a variety of colors and shades, so it is easy to find one that will match the existing finish of the furniture. It is also easy to apply, and can be done with a brush or roller.

When refinishing furniture with veneer, it is important to sand the surface of the furniture first. This will help the veneer to adhere better to the surface. Once the furniture is sanded, the next step is to apply the veneer.

It is important to start in the middle of the piece of furniture and work your way out. This will help to avoid any air bubbles that might form under the veneer. Once the veneer is applied, it is important to let it dry completely before moving on to the next step.

The next step is to apply a top coat to the furniture. This will protect the veneer and give it a beautiful shine. There are a variety of top coats that can be used, but it is important to choose one that is compatible with the veneer.

After the top coat has been applied, the final step is to buff the furniture. This will give it a smooth finish and make it look like new again.

Conclusion

When refinishing furniture with veneer, it is important to first remove any old paint or varnish that may be on the surface. Once the surface is clean, you can begin to sand the veneer down using a fine-grit sandpaper. Once the veneer is sanded, you can apply a new coat of paint or varnish. Be sure to allow the new coat of paint or varnish to dry completely before using the furniture.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top