How to Limewash Wood Furniture

Limewash is a type of paint made from limestone that is diluted with water. It has a chalky, matte finish and can be used to give new life to old furniture.

To limewash wood furniture, start by sanding down the piece to create a smooth surface. Next, apply a coat of primer and let it dry. Once the primer is dry, apply the limewash in long, even strokes. Let the first coat dry completely before applying a second coat. Once the second coat is dry, you can add a top coat of paint for extra protection.

How to Limewash Wood Furniture

Limewash wood furniture is a process of painting furniture with a diluted slaked lime and water mixture. This paint technique is often used on rustic or shabby chic style furniture to give it a distressed look.

Limewash wood furniture is a process of painting furniture with a diluted slaked lime and water mixture. This paint technique is often used on rustic or shabby chic style furniture to give it a distressed look.

To limewash wood furniture, you will need:

-Slaked lime (you can find this at a hardware store)
-Water
-Paintbrush
-Bucket
-Old rag

1.Mix the slaked lime and water together in a bucket, using a 1:1 ratio.

2.Dip your paintbrush into the mixture and start painting your furniture.

3. work in small sections, and paint with the grain of the wood.

4.After you have finished painting, take an old rag and wipe off any excess paint.

5.Let the furniture dry completely before adding any additional coats of paint.

Conclusion

There are a few things to keep in mind when limewashing wood furniture. The first is to make sure the piece is clean and free of any dirt or debris. The second is to choose the right paint. A high-quality paint will help to ensure a smooth and even finish. The third is to use a brush or roller specifically designed for use with limewash. This will help to ensure a even application and avoid any streaking.

Once the piece is prepped and the paint is chosen, the actual process of limewashing is relatively simple. Begin by painting a small section of the furniture with the limewash. Work in small sections and brush or roll the paint on in a even layer. Once the first section is complete, allow it to dry completely before moving on to the next. Continue until the entire piece is covered.

Once the limewash is dry, it is important to protect it. A clear sealant can be applied over the top to help protect the finish and keep it looking fresh. With proper care, a limewashed piece of furniture can last for many years.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top