How to Fix Dents on Wood Furniture

Dents in wood furniture can often be fixed quite easily. If the dent is small, you can often just rub it out with your finger. If the dent is bigger, you can use a pencil eraser or a cotton swab to rub it out. If the dent is really big, you may need to use a small piece of sandpaper to buff it out.

In most cases, you won’t need to use any type of cleaner or polish when you’re fixing a dent in wood furniture. However, if the wood is particularly dirty or if the finish is starting to wear away, you may want to use a mild cleaner or polish to help clean and protect the wood.

How to Fix Dents on Wood Furniture

Most wood furniture has a protective finish that helps to prevent dents and other damage. However, sometimes accidents happen and dents can occur. There are a few different ways that you can fix dents on wood furniture.

One way to fix a dent is to use a vacuum cleaner. If the dent is small, you can try using the hose attachment to suck out the dent. You may need to do this a few times to get the dent completely out.

Another way to fix a dent is to use a hairdryer. Set the hairdryer on the low setting and hold it over the dent. Move the hairdryer around so that the heat is evenly distributed. Once the dent is warm, you can use a wooden spoon or your fingers to push the dent out.

If the dent is still not coming out, you can try using boiling water. Boil a pot of water and then hold the pot over the dent. The heat from the water will cause the wood to expand and the dent should pop out. Be careful not to burn yourself with the hot water.

Once the dent is out, you can use a bit of sandpaper to smooth out any rough edges. Then, you can apply a new coat of finish to the area to help protect it from future damage.


If you have a dent in your wood furniture, there are a few ways you can fix it. One way is to use a plunger. Put the plunger over the dent and push and pull the plunger up and down. Another way is to use a vacuum cleaner with the hose attachment. Put the hose attachment over the dent and turn the vacuum cleaner on. The suction will pull the dent out. If the dent is deep, you may need to use a hammer and a nail to push the dent out from the inside. Put the nail in the dent and tap the nail with the hammer until the dent pops out.

Leave a Comment

Scroll to Top