How to Fix Broken Veneer on Furniture

If your veneer is peeling, chipped, or cracked, don’t despair! With a little bit of effort, you can repair it yourself.

1. First, clean the area around the damage with a soft cloth and mild soap.

2. Next, apply a thin layer of wood glue to the back of the veneer.

3. Carefully place the veneer over the damaged area, then use a damp cloth to smooth it out.

4. Finally, apply a layer of clear nail polish or polyurethane to the area to protect it.

How to Fix Broken Veneer on Furniture

When veneer is applied to furniture, it’s glued down with adhesives that are stronger than the wood itself. Over time, these adhesives can fail, causing the veneer to peel away or crack. If your furniture has damaged veneer, it’s not the end of the world. With a little know-how, you can repair it yourself.

The first step is to assess the damage. If the veneer is only cracked or chipped in a few spots, you can simply glue it back down with wood glue. If the damage is more extensive, you may need to replace the entire piece of veneer.

To repair a small chip or crack, start by clean the area with a damp cloth. Then, apply a small amount of wood glue to the back of the veneer. Press the veneer back into place and hold it there for a few minutes to allow the glue to set.

For larger cracks or holes, you’ll need to patch the area with a piece of new veneer. Cut a piece of veneer to size, using a sharp knife or utility knife. Apply wood glue to the back of the patch, then press it into place over the hole. Hold it there for a few minutes to allow the glue to set.

Once the glue has set, you can sand the area smooth with fine-grit sandpaper. If the veneer is still not level with the rest of the surface, you can apply another layer of wood glue and sand it again after it dries.

Once you’re satisfied with the repair, you can finish it off with a coat of stain or paint. If the veneer is stained, you’ll need to use a gel stain that’s compatible with the finish. If the veneer is painted, you can use any type of paint. Just be sure to sand the area smooth first and prime it with a bonding primer before painting.

With a little bit of effort, you can repair damaged veneer and make your furniture look like new again.

Conclusion

If your veneer is peeling, you can re-adhere it using a strong craft glue, such as Gorilla Glue. First, clean the area around the peeling veneer with a damp cloth. Then, apply a thin layer of glue to both the veneer and the furniture. Use a putty knife or your fingers to press the veneer back into place. Wipe away any excess glue, and allow the piece to dry overnight.

If your veneer is cracked, you can repair it using wood filler. First, clean the area around the cracked veneer with a damp cloth. Then, apply wood filler to the crack, using a putty knife. Wipe away any excess filler, and allow the piece to dry overnight. Once the filler is dry, you can sand it down until it is flush with the rest of the veneer.

If your veneer is chipped, you can repair it using epoxy. First, clean the area around the chipped veneer with a damp cloth. Then, mix together equal parts epoxy and hardener. Apply the epoxy to the chipped area, using a putty knife. Wipe away any excess epoxy, and allow the piece to dry overnight. Once the epoxy is dry, you can sand it down until it is flush with the rest of the veneer.

Leave a Comment

Scroll to Top