Top 10 Best Primer For Exterior Wood [2022]

Best Primer For Exterior Wood
We Earn Money
NoProductScoreAction
1Prestige Paints Exterior Paint and Primer In One9.8Buy On Amazon
2Rust-Oleum, Flat Gray Primer 1980502 Painters Touch Quart Latex9.6Buy On Amazon
3Rust-Oleum 272479 Zinsser Bulls Eye 1-2-3 Plus Spray Primer9.6Buy On Amazon
4Zinsser 02004 Bulls Eye 1-2-3 All Surface Primer9.4Buy On Amazon
5Majic PAINTS Interior/Exterior Satin Paint9.2Buy On Amazon
61 qt Zinsser 260925 White Zinsser9Buy On Amazon
7Prestige Exterior Paint and Primer In One8.8Buy On Amazon
8KILZ L211101 Adhesion High-Bonding Interior Latex Primer/Sealer8.6Buy On Amazon
9Primer8.4Buy On Amazon
10INSL-X SXA11009A-04 Stix Acrylic Waterborne Bonding Primer8.2Buy On Amazon

Table Of Content:

1. Prestige Paints Exterior Paint and Primer In One

  • Prestige Paints has created a comparable color based on color specifications of the original color using industry leading technology.
  • This Sherwin Williams paint color name is a trademark of Sherwin Williams.
  • High hiding formula for excellent coverage with smooth application
  • 100% Acrylic latex paint for easy soap and water clean-up
  • Low VOC: less than 50 g/L 0. 42 lbs./gal. prior to tinting

2. Rust-Oleum, Flat Gray Primer 1980502 Painters Touch Quart Latex

  • Use for a variety of indoor and outdoor project surfaces including wood, metal, plaster, masonry or unglazed ceramic.
  • Water-based acrylic formula is low odor, resist chips and provides long-lasting protection
  • Covers up to 120 sq ft and dries to touch in 30 minutes for quick project completion
  • Flat finish minimizes surface imperfections, goes on smoothly and provides excellent base
  • Prior to application sand surfaces with 180/200 grit sandpaper, then wash with a degreaser, allow the surface to dry and apply paint.
  • Indoor/Outdoor durability
  • Increases adhesion and durability of finish coat
  • Cleans with soap and water
  • Apply to bare or painted wood, metal, plaster, masonry or unglazed ceramic
  • Fast-drying

3. Rust-Oleum 272479 Zinsser Bulls Eye 1-2-3 Plus Spray Primer

  • Interior/exterior use on new or previously painted Drywall, concrete, wood, masonry, metal and glossy or difficult surfaces.
  • Oil-based formula seals uniformly and will Stick to surface without sanding
  • Dries to the touch in just 30 minutes and covers up to 12 sq ft
  • Has excellent stain blocking resistance and can be used over any oil or Latex topcoat
  • Provides a smooth, White finish and; is designed to block imperfections with only one Coat

4. Zinsser 02004 Bulls Eye 1-2-3 All Surface Primer

  • Interior/exterior use on new or previously painted drywall, concrete, wood, masonry, metal and glossy or difficult surfaces.
  • Water-based formula seals uniformly and will stick to surface without sanding
  • Dries to the touch in 35 minutes, ready to topcoat in 1 hour and covers up between 87-112 sq.
  • Has excellent stain blocking resistance and can be used with any oil or latex topcoat
  • One coat hide saves time and money by improving hide and coverage of topcoats

5. Majic PAINTS Interior/Exterior Satin Paint

  • Color: White
  • IDEAL FOR DIY PROJECTS: Repurpose furniture, trim, cabinets, doors, or any project you have in in mind.
  • SUPERIOR COLOR-RETENTION: Levels to a beautiful smooth satin finish
  • EASY-TO-APPLY: Sticks to any surface without sanding or priming
  • ALL-PURPOSE USE: Perfect for wood, metal, brick, drywall, glass, steel, tile, vinyl, aluminum, most plastics, copper, and masonry.

6. 1 qt Zinsser 260925 White Zinsser

  • Use on peeling or worn interior or exterior surfaces including wood, metal, concrete and more
  • Triple-thick formula penetrates and bonds with cracked or peeling surfaces to glue down edges and fill in gaps for a smooth finish.
  • Dries to the touch in 30 minutes, can be recoated in 2 hours and covers between 12-50 sq.
  • Creates a smooth, flexible, sealed finish
  • Top coat with any alkyd or latex paint
  • Water-base primer-sealer
  • Interior and exterior
  • Seals worn surfaces for a smooth finish
  • Outstanding flexibility
  • Topcoat with any latex or alkyd paint

7. Prestige Exterior Paint and Primer In One

  • Ultra premium paint and primer in one
  • High hiding formula for excellent coverage with smooth application
  • 100% Acrylic latex paint for easy soap and water clean-up
  • Low VOC: Less than 50 g/L 0. 42 lbs. /gal
  • Durable and washable with premium mildew resistant coating

8. KILZ L211101 Adhesion High-Bonding Interior Latex Primer/Sealer

  • A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces.
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere.
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals.
  • Use on most interior and exterior surfaces where a secure bond is critical.
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white.
  • Use on properly prepared surfaces free of dust, grease, chalk, mold, rust and peeling paint.
  • KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour.
  • KILZ has been making premium primers and paints for 40 years.

9. Primer

  • Price For: Each Dry Time Tack Free: 30 min.
  • Paint and Primer Surface Material: Aluminum, Concrete, Drywall, Masonry, Metal, Plaster, PVC, Steel, Vinyl, Wood Paint and Primer Finish: Primer Paint Color Family: Grays Application Temperature: 50 Degrees to 90 Degrees F Dry Time Recoat: 1 hr.
  • For Use With: Any Topcoat Country of Origin (subject to change): United States

10. INSL-X SXA11009A-04 Stix Acrylic Waterborne Bonding Primer

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals.
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces.
  • Bonds to “hard-to-coat” surfaces and can be top coated with almost any product.
  • Fully cures in temperatures as low as 35 °F.
  • 75 – 100 square foot coverage for interior or exterior use
  • Low VOC and easy soap and water cleanup.
  • Excellent enamel holdout, providing a great base for an even topcoat finish.
  • Before painting, review the INSL-X STIX label for proper preparation and application tips.

Leave a Comment

Your email address will not be published.

Scroll to Top